SPECIFICATIONS

Battery Capacity: 1800mAh

Blocked Rotor Power: 8W

Brand Name: BIGWASP

Charging Interface: TYPE - C interface, with an input of 5V/2A

Charging Time: Approximately 3 hours

Choice: yes

Commodity Quality Certification: 3C,ce

Display Screen: Features a 0.99 - inch color screen

Gun Type: Electric

High-concerned chemical: None

Is Batteries Included: Yes

Material: Alloy

Motor: Equipped with a 1800 hollow cup motor, with a specification of 12V - 10,000RPM

Number of Pieces: One Unit

Origin: Mainland China

Output Voltage: Ranges from 4V to 12V, adjustable in 0.1V increments

Rotation Speed: 10,000 revolutions per minute at 12V

Stroke: Adjustable between 2.0mm and 4.2mm

Type: Tattoo Gun

Working Time: 6 hours under 8V power supply

semi_Choice: yes

Product Name: Hollow Cup Motor
1. Performance Parameters
- Rotation Speed: 10,000 revolutions per minute at 12V
- Blocked Rotor Power: 8W
- Output Voltage: Ranges from 4V to 12V, adjustable in 0.1V increments
- Motor: Equipped with a 1827 hollow cup motor, with a specification of 12V - 10,000RPM
- Display Screen: Features a 0.99 - inch color screen
- Battery Capacity: 1800mAh
- Working Time: 6 hours under 8V power supply
- Charging Time: Approximately 3 hours
- Charging Interface: TYPE - C interface, with an input of 5V/2A
- Stroke: Adjustable between 2.0mm and 4.2mm

2. Operation Instructions
- **Power - on**: Press and hold the power button for 1.5 seconds to turn on the device. There is no output initially. Double - click the power button to turn on, and there is still no output. Forced startup will display a lightning icon. The device first outputs 10V for 200 milliseconds, and then the set output voltage is displayed. The default voltage displayed on the first power - on is 8V.
- **Stippling Mode**: When the output is on, double - click the power button to enter the stippling mode. Double - click again to exit this mode.
- **Voltage Adjustment**: When the output is off, click the plus or minus button to adjust the gear. When the output is on, click the plus or minus button to adjust the output voltage, which ranges from 2V to 10V. Holding down the button will change the voltage every 100 milliseconds.
- **Power - off**: Pressing the power - off button clears the timing. Abnormal shutdown does not clear the timing. The screen will not dim without any operation. If there is no output for 5 minutes after power - on, the device will automatically shut down. Press and hold the power button for 1.5 seconds to turn off the device.

3. Protection Mechanisms
- **Short - circuit Protection**: In case of a short - circuit, the output will be immediately turned off, and "E1" will be displayed on the screen for 5 seconds.
- **Overload Protection**: When overloaded, the output will be turned off, and "E2" will be displayed on the screen for 5 seconds.
- **Low Battery Protection**: When the battery level is lower than 5%, the output will be turned off, and the battery icon will flash. The output cannot be turned on again. When the battery level reaches 0%, the output will be turned off, and the battery icon will flash for 5 seconds before the device shuts down. If the device is turned on again when the battery level is 0%, the battery icon will flash for 5 seconds before shutting down again.
4. Charging Features
The charging status is displayed during charging. The device does not support being used while charging.